Skip to main content
muellerr64
muellerr64
New Member
July 17, 2020
Question

Can't add additional routing addresses

  • July 17, 2020
  • 2 replies
  • 5373 views

Hi,

 

Trying add to a list of routing addresses to our SSL VPN, and the GUI complains 'invalid input'.  I have 6 subnets listed, and need to add a 7th.  Is there some limit or strange 'special' character issue?  My address names look like this...

 

10.20.0.0/16

10.21.0.0/16

10.22.0.0/16

10.23.22.0/24

BobsVPNRemote219

JimsVPNRemote220

 

Tried adding 10.23.23.0/24, it fails, tried adding Subnet23_23...everything I try via the GUI fails with 'invalid input'.  If there is no artificial limit, I'll add via CLI.  Didn't want to do that without understanding the issue, we have 100's of connected remote users, don't need that kind of trouble if the SSLVPN goes down.

 

 

This is a v6.0.10 100D.

 

Ron

    2 replies

    Yurisk
    SuperUser
    Yurisk
    SuperUser
    July 20, 2020

    I've never met a limit in split tunneling. Trying to add 7 networks works just fine for me (6.0.9):

     

    Yurisk
    SuperUser
    Yurisk
    SuperUser
    July 20, 2020

    I've never met a limit in split tunneling. Trying to add 7 networks works just fine for me (6.0.9):

     

    emnoc
    emnoc
    New Member
    July 20, 2020

    It would wise to show us what your doing but invalid input seems to indicate one of the following 1> the network # is wrong or 2> the mask is wrong for the network #

     

    Ken Felix

    ede_pfau
    SuperUser
    ede_pfau
    SuperUser
    July 20, 2020

    ya, no error if the routes were overlapping.

    BTW, I created a /31 route just to see if the GUI prevents this...it doesn't.

    Terms & ConditionsAccessibility statement