Can't access the NAC GUI

Forum|Forum|6 months ago
March 5, 2026
3 replies
246 views

I am trying to deploy an FNC-CA-500F.

I changed the IP address of my network card to 192.168.1.10 so it matches the default address 192.168.1.99 of the NAC. I was able to access the device via PuTTY, and I configured allowaccess https-adminuiin port1.

The ping to 192.168.1.99 is successful, but I am unable to access the graphical user interface (GUI).

Do you know why this might be happening?

AEK

SuperUser

Just in case you missed it, the WebUI is listening on port 8443, not 443.

AEK

EijyyyAuthor

New Member

yes i tried it many times , https://192.168.1.99:8443

ebilcari

Staff

It usually take some time for the FNAC application to start 5-10 minutes. To check the status of the processes you can use the following command:

fnac76 # diagnose tail -f output.processManager
2026-03-10 13:37:29.552 +0100 [main] INFO yams.CampusManager - [isSystemOK] latest predefined result true custom health check result true, final result true
2026-03-10 13:37:29.855 +0100 [main] INFO yams.CampusManager - Loaders are running.
2026-03-10 13:37:29.855 +0100 [main] INFO yams.CampusManager - Processes are running

If something is preventing the services from starting you can also check this log files:

fnac76 # diagnose tail -f output.master

fnac76 # diagnose tail -f messages

Emirjon

Sign up

Login with SSO

Login to the community

Login with SSO