Can't access admin page

Forum|Forum|7 years ago
July 16, 2018
1 reply
17085 views

I work in company, and i must configure new fortigate 90D to existing 100C because end of life. To shorten the time I configure I do a copy and paste configuration from 100c to 90d on the backup file. Then i do restore on 90d, but load is soo long ... And now i can not access admin page at default 192.168.1.99, can anyone help me?

Best answer by rwpatterson

Welcome to the forums.

When migrating from one device to another, it's not simply cut from one and paste to another. There is more behind the scenes that needs to be considered:

* Are the devices the same?

* Are the interface names the same?

* Are the firmware levels the same?

I would try to log in from the console and see what is going wrong there. If your past login/management IP was still 192.168.1.99, then you have at least one issue to look into.

rwpattersonAnswer

New Member

Welcome to the forums.

When migrating from one device to another, it's not simply cut from one and paste to another. There is more behind the scenes that needs to be considered:

* Are the devices the same?

* Are the interface names the same?

* Are the firmware levels the same?

I would try to log in from the console and see what is going wrong there. If your past login/management IP was still 192.168.1.99, then you have at least one issue to look into.

arif05rachmanAuthor

New Member

Yes it's my fault :(. All different. I do not understand how to go through cli. I previously used the web interface to log into the admin page using ip 192.168.1.99. Now it can not be accessed via the same ip on the web interface. Is there a way to reset to the default settings.? As I know Fortigate 90D does not have a button to reset.

Sign up

Login with SSO

Login to the community

Login with SSO

Scanning file for viruses.

This file cannot be downloaded