Skip to main content
graham_morrison
graham_morrison
New Member
October 21, 2015
Question

Bandwidth Usage Scales

  • October 21, 2015
  • 1 reply
  • 4744 views

Good afternoon,

We are running v5.2.3-build0724 150731 on our analyzer.  When we run the bandwidth summary report we get the info but we are wondering can we change the scales so its not MB on the X axis.  Right now it shows the usage below as hovering around the 350MB mark. We only have a 100Mb pipe here at the office so i assuming that should be 35Mbs.

 

 

    1 reply

    hzhao_FTNT
    Staff
    hzhao_FTNT
    Staff
    October 21, 2015

    Hi there, X-axis in this chart is for traffic volume, it showed the total sent/received bytes in certain time period.

     

    Regards,

    hz

    graham_morrison
    graham_morrisonAuthor
    New Member
    October 21, 2015

    Thanks for the quick reply.  So that's just actual volume of traffic.  Can you get bandwidth usage or is that another report?

    hzhao_FTNT
    Staff
    hzhao_FTNT
    Staff
    October 21, 2015

    You are welcome. We don't have this kind of info in predefined report in 5.2.x, but currently we are working for it on 5.4.0.

     

    Terms & ConditionsAccessibility statement