Skip to main content
chlo
chlo
New Member
January 29, 2018
Solved

Automating your FW configuration with agents

  • January 29, 2018
  • 1 reply
  • 6332 views

Hey y'all,

 

I'm new here so bear with me

I'm looking for a solution to automate setting up a FortiGate machine - i.e. spin it up and have it automatically set rules, VIPs, etc. without ever necessarily having to log onto it. The obvious solution is Ansible/Chef/Puppet and the like but I've no experience using these tools on FortiOS, only Linux distros. Has anybody tried this? Or even better does anybody have a different solution to my conundrum?

 

Thanks in advance!

- Chloé

 

 

    Best answer by neonbit

    You can do this with a FortiManager (physical or virtual appliance). You can set everything up on the FortiManager and when the FortiGate connects to it it will pull down the new config.

     

    There are two ways to get the FortiGate to connect to the FortiManager. Either you configure the IP address on the FortiGate (so you will have to boot it up and configure the setting), or alternatively if you have lots of devices to deploy and want true zero touch you can purchase a deploy license when you buy the FortiGates. This allows you to configure the FortiManager IP address in the FortiCloud service. When the FortiGates first boot up they will ask the cloud service what it's FortiManager IP address is, once it gets it it will then autoconnect and pull it's config.

     

    I've seen this done with a 200 FortiGate global deployment and it works really well.

    1 reply

    neonbit
    neonbitAnswer
    New Member
    January 29, 2018

    You can do this with a FortiManager (physical or virtual appliance). You can set everything up on the FortiManager and when the FortiGate connects to it it will pull down the new config.

     

    There are two ways to get the FortiGate to connect to the FortiManager. Either you configure the IP address on the FortiGate (so you will have to boot it up and configure the setting), or alternatively if you have lots of devices to deploy and want true zero touch you can purchase a deploy license when you buy the FortiGates. This allows you to configure the FortiManager IP address in the FortiCloud service. When the FortiGates first boot up they will ask the cloud service what it's FortiManager IP address is, once it gets it it will then autoconnect and pull it's config.

     

    I've seen this done with a 200 FortiGate global deployment and it works really well.

    chlo
    chloAuthor
    New Member
    January 29, 2018

    Awesome, thank you!

    I did read a little into that before posting but thought I'd ask anyways. I'll definitely look into it though.

     

    While I've got you here, have you any experience of uploading a CLI script to execute via the CLI interface?

    I know you can upload it in the GUI, but is there a command that does it? I've been going around in circles all morning look on google...

     

    All the best!

    Chloé

    Terms & ConditionsAccessibility statement