Skip to main content
papapuff
papapuff
New Member
July 5, 2017
Question

Ask - Deep review of FG90D and 100E

  • July 5, 2017
  • 2 replies
  • 16533 views

hi there,

 

need advice here.

 

We plan to buy new fortigate, but confuse between 90D and 100E. anyone have deep review for these models?

 

What we need is:

- configure some ports as interface, and some ports as switch mode.

- build and connect VPN IPSEC tunnel up to 15.

- build VPN ssl up to 10 users.

 

is the fortigate can use fortiddns dedicated for each WAN?

is it possible to add another WAN?

 

thank you.

    2 replies

    Sunil_Panchal_NSE7
    Sunil_Panchal_NSE7
    New Member
    July 5, 2017

    Dear friend ,

                        just check the price different and 100 E is new series from fortinet i  so will suggest go for the 100E because may be  in future if you grow or company size increase it should not affect the performance of the firewall.

    you are comparing  wrong device you should check for 90D and 90E.

     

    best regards 

     

     

    papapuff
    papapuffAuthor
    New Member
    July 5, 2017

    Hi,

    thanks for reply.

     

    yes I know the price so different.

    anyway, is it worth-ed if I buy FG-100E, for 5 next 5 years?

     

    thank you.

    Iescudero
    Iescudero
    New Member
    July 5, 2017

    Hi there!

    Both devices apply for:

    - configure some ports as interface, and some ports as switch mode.

    - build and connect VPN IPSEC tunnel up to 15.

    - build VPN ssl up to 10 users.

     

    is it possible to add another WAN? Yes, you can use any port for wan traffic.

    is the fortigate can use fortiddns dedicated for each WAN? Yes, both can do this, even if the dynamic DNS is not from fortinet, like dyndns.

     

    I think there's a big difference between both devices, because the 90D is more like small office and the 100E suits better for a next generation firewall use (more utm and more sessions per second)

     

    Here's both datasheet:

     

    90D:

    https://www.fortinet.com/content/dam/fortinet/assets/data-sheets/FortiGate_FortiWiFi_90D_Series.pdf

     

    100E:

    https://www.fortinet.com/content/dam/fortinet/assets/data-sheets/FortiGate_100E_Series.pdf

     

    The fortigate 100E duplicates throughput (7.4 gbps against 3.5 gbps) but has a dramatic improve in utm:

    360Mbps against 25. or IPS 500Mbps against 41.

     

    Price:

    http://www.avfirewalls.com/FortiGate-90D.asp $780.00 (Without license i think)

    http://www.avfirewalls.com/FortiGate-100E.asp $1,610.00

     

    In my opinion, if I could and i can afford it, i would buy the 100E.

     

    hope it help

     

    Itguy
    Itguy
    New Member
    July 6, 2017

    90D is a horrible device with low throughput. Don't buy it.. Even the 60E is way better than the 90D.

     

    60E has 2 WAN connections.

     

    papapuff wrote:

    hi there,

     

    need advice here.

     

    We plan to buy new fortigate, but confuse between 90D and 100E. anyone have deep review for these models?

     

    What we need is:

    - configure some ports as interface, and some ports as switch mode.

    - build and connect VPN IPSEC tunnel up to 15.

    - build VPN ssl up to 10 users.

     

    is the fortigate can use fortiddns dedicated for each WAN?

    is it possible to add another WAN?

     

    thank you.

    Uwe_Sommerfeld
    Uwe_Sommerfeld
    New Member
    July 6, 2017

    I would say you should consider also the 100D

    - OK, older (D) generation

    - D is a little cheaper than E

    - rock solid device running at many many customer sites

    - OS 5.2 support if pure stability is a key factor

     

    Of course you can go for the latest generation but in this case 90D will not satisfy your expectation.

    90E is available so compare 90D to 100D and / or 90E to 100E.

     

    Neophron
    Neophron
    New Member
    July 7, 2017

    Good morning,

    the 100E price might double compared to the 90D, but it more then doubles in power.

    As stated by the other posters, the throughput, sessions etc etc, all rise tremendously.

    To compare them, look at the product matrix, and I'm sure you'll be convinced.

    https://www.fortinet.com/content/dam/fortinet/assets/data-sheets/Fortinet_Product_Matrix.pdf

     

    To me the choice is obvious, end user list price of the two modules with 5 year UTM 8x5 support fortiguard&forticare is;

    90D  :  3.844

    100E :  6.697

     

    hope this helps, good luck!

     

     

     

    edit : price is in euro's ;)

    Terms & ConditionsAccessibility statement