Adom upgrade from 5.4 to 5.6 on FortiManager 5.6.2

Forum|Forum|8 years ago
March 5, 2018
2 replies
13549 views

Hi all,

I have an issue when trying to upgrade my ADOM from 5.4 to 5.6.

Anyone has had this issue or knows what is going wrong?

This is the error:

Fail(errno=151):dynamic-interface default mapping has been used

All devices in the Adom have been upgraded from 5.4.4 to 5.6.3

thanks in advance

ergotherego

New Member

Your picture did not attach correctly, FYI.

chall_FTNT

Staff

This is likely because default mapping has somehow been enabled on an interface but no value assigned.

By default, all interface are mapped with per-device mapping & default mapping is disabled.

Solution is to disable default-mapping (or assign a value). You can disable it manually or a script can be used to accomplish this.

config dynamic interface edit X set default-mapping disable

tuxerl

New Member

Hi,

I had exactly the same issue.

Reason: In "Policy Objects" -> "Interfaces" there was an "Interface" as well as a "Zone" defined, which both mapped to the same physical Interface through their Default Mapping.

Removed the "Zone" and upgrade went fine.

best regards,

Tuxerl.

tuxerl

New Member

Support just confirmed this as a known bug 469958 which will be fixed in the next FMGT release 5.6.3

ujnetsec

New Member

I am getting this error when i try to upgrade from 5.6 to 6.0 :

Fail(errno=131):datasrc invalid. object: firewall ssl-ssh-profile ssl-exempt address 26. detail: auth.gfx.ms. solution : data not exist

how can i resolve this?

Sign up

Login with SSO

Login to the community

Login with SSO

Scanning file for viruses.

This file cannot be downloaded