Skip to main content
Sensi_AOEH
Sensi_AOEH
New Member
March 31, 2019
Question

ADOM Upgrade 5.4 -> 5.6 fails

  • March 31, 2019
  • 1 reply
  • 7956 views

Hi Community

 

I try to upgrade our ADOM from 5.4 to 5.6. For some reason, I get an error -2 after around 5% with the meaningful description "Invalid FQDN".

I double checked the FQDN under "Policy & Objects" -> "Object Configurations" -> "Firewall Objects" -> "Addresses" but they seems to be fine. 

 

What could I do to get rid of this error?

 

Cheers, Alex

    1 reply

    gabyrossi
    gabyrossi
    New Member
    April 1, 2019

    Hi, if in 5.6 you can not use fqdn in firewall policies. check that.

    in 5.6 wilcard appears fqdn and fqdn used for ssl inspection

     

    https://help.fortinet.com...s/FQDN%20Addresses.htm https://help.fortinet.com/fos50hlp/54/Content/FortiOS/fortigate-firewall-52/Firewall%20Objects/Addresses/Wildcard%20FQDN.htm

    Regards

    Sensi_AOEH
    Sensi_AOEHAuthor
    New Member
    April 2, 2019

    Hi 

     

    Thanks a lot for you answer.

    I'm unable to upgrade our ADOM due to "Invalid FQDN".

    The problem is, that the error isn't pointing to any entry or showing me any hint where I have to look at.

    I checked the Firewall Objects but can't find any obvious failure in my FQDN addresses.

     

    Cheers, Alex

    chall_FTNT
    Staff
    chall_FTNT
    Staff
    April 2, 2019

    For more detail on why an ADOM upgrade doesn't work, you can enable the following debug:

     

    diagnose debug enable diagnose debug service cdb 255

     

    You can also review all FQDN address objects and use "Where Used" in FMG to make sure that they are not being referenced directly by any policies in any policy package.

    Terms & ConditionsAccessibility statement