Explorer III

Question

Add switch Alcatel to Fortinac

Forum|Forum|1 year ago
March 14, 2025
3 replies
1724 views

I have difficult to add switch Alcatel omniswitch 6860 can some one help.

When I configure credential snmp is OK but CLI I can't connect it. When I test in fortinac console cli all is ok but in gui no.

FortiNAC

Sheikh

Staff

Hello @Waloo5

If there is any banner configured on the switch, ensure that it does not contain # or > signs.

https://community.fortinet.com/t5/FortiNAC/Technical-Tip-Issues-using-character-in-CLI-banner/ta-p/190812

regards,

Sheikh

If you have found a solution, please like and mark it as solved to make it easily accessible for everyone.

Waloo5Author

Explorer III

Hi @Sheikh

thank for your reply. there is no banner in switch

the result of ssh from CLI fortinac :

fortinac-ca1 #
fortinac-ca1 # execute ssh admin@10.0.3.11
(admin@10.0.3.11) Password:

SW_ETG1>

Sheikh

Staff

Hi @Waloo5 ,

Could you run the following commands to see which SSH keys are being exchanged?

ssh -vvv admin@10.0.3.11

what is the version of FortiNAC ?

regards,

Sheikh

If you have found a solution, please like and mark it as solved to make it easily accessible for everyone.

Waloo5Author

Explorer III

Hi @Sheikh

fortiNAC-F version 7.6.2

fortinac-ca1:~$
fortinac-ca1:~$ ssh -vvv admin@10.0.3.11
OpenSSH_8.9p1, OpenSSL 3.0.12 24 Oct 2023
debug1: Reading configuration data /etc/ssh/ssh_config
debug1: /etc/ssh/ssh_config line 20: Applying options for *
debug2: resolve_canonicalize: hostname 10.0.3.11 is address
debug3: expanded UserKnownHostsFile '~/.ssh/known_hosts' -> '/home/admin/.ssh/known_hosts'
debug3: expanded UserKnownHostsFile '~/.ssh/known_hosts2' -> '/home/admin/.ssh/known_hosts2'
debug1: Authenticator provider $SSH_SK_PROVIDER did not resolve; disabling
debug3: ssh_connect_direct: entering
debug1: Connecting to 10.0.3.11 [10.0.3.11] port 22.
debug3: set_sock_tos: set socket 3 IP_TOS 0x48
debug1: Connection established.
debug1: identity file /home/admin/.ssh/id_rsa type -1
debug1: identity file /home/admin/.ssh/id_rsa-cert type -1
debug1: identity file /home/admin/.ssh/id_ecdsa type -1
debug1: identity file /home/admin/.ssh/id_ecdsa-cert type -1
debug1: identity file /home/admin/.ssh/id_ecdsa_sk type -1
debug1: identity file /home/admin/.ssh/id_ecdsa_sk-cert type -1
debug1: identity file /home/admin/.ssh/id_ed25519 type -1
debug1: identity file /home/admin/.ssh/id_ed25519-cert type -1
debug1: identity file /home/admin/.ssh/id_ed25519_sk type -1
debug1: identity file /home/admin/.ssh/id_ed25519_sk-cert type -1
debug1: identity file /home/admin/.ssh/id_xmss type -1
debug1: identity file /home/admin/.ssh/id_xmss-cert type -1
debug1: identity file /home/admin/.ssh/id_dsa type -1
debug1: identity file /home/admin/.ssh/id_dsa-cert type -1
debug1: Local version string SSH-2.0-OpenSSH_8.9
debug1: Remote protocol version 2.0, remote software version OpenSSH_7.7-FIPS(capable)
debug1: compat_banner: match: OpenSSH_7.7-FIPS(capable) pat OpenSSH_7.0*,OpenSSH_7.1*,OpenSSH_7.2*,OpenSSH_7.3*,OpenSSH_7.5*,OpenSSH_7.6*,OpenSSH_7.7* compat 0x04000002
debug2: fd 3 setting O_NONBLOCK
debug1: Authenticating to 10.0.3.11:22 as 'admin'
debug3: record_hostkey: found key type ECDSA in file /home/admin/.ssh/known_hosts:1
debug3: record_hostkey: found key type ECDSA in file /home/admin/.ssh/known_hosts:2
debug3: record_hostkey: found key type ECDSA in file /home/admin/.ssh/known_hosts:3
debug3: load_hostkeys_file: loaded 3 keys from 10.0.3.11
debug1: load_hostkeys: fopen /home/admin/.ssh/known_hosts2: No such file or directory
debug1: load_hostkeys: fopen /etc/ssh/ssh_known_hosts: No such file or directory
debug1: load_hostkeys: fopen /etc/ssh/ssh_known_hosts2: No such file or directory
debug3: order_hostkeyalgs: prefer hostkeyalgs: ecdsa-sha2-nistp256-cert-v01@openssh.com,ecdsa-sha2-nistp384-cert-v01@openssh.com,ecdsa-sha2-nistp521-cert-v01@openssh.com,ecdsa-sha2-nistp256,ecdsa-sha2-nistp384,ecdsa-sha2-nistp521
debug3: send packet: type 20
debug1: SSH2_MSG_KEXINIT sent
debug3: receive packet: type 20
debug1: SSH2_MSG_KEXINIT received
debug2: local client KEXINIT proposal
debug2: KEX algorithms: curve25519-sha256,curve25519-sha256@libssh.org,ecdh-sha2-nistp256,ecdh-sha2-nistp384,ecdh-sha2-nistp521,sntrup761x25519-sha512@openssh.com,diffie-hellman-group-exchange-sha256,diffie-hellman-group16-sha512,diffie-hellman-group18-sha512,diffie-hellman-group14-sha256,ext-info-c,kex-strict-c-v00@openssh.com
debug2: host key algorithms: ecdsa-sha2-nistp256-cert-v01@openssh.com,ecdsa-sha2-nistp384-cert-v01@openssh.com,ecdsa-sha2-nistp521-cert-v01@openssh.com,ecdsa-sha2-nistp256,ecdsa-sha2-nistp384,ecdsa-sha2-nistp521,ssh-ed25519-cert-v01@openssh.com,sk-ssh-ed25519-cert-v01@openssh.com,sk-ecdsa-sha2-nistp256-cert-v01@openssh.com,rsa-sha2-512-cert-v01@openssh.com,rsa-sha2-256-cert-v01@openssh.com,ssh-ed25519,sk-ssh-ed25519@openssh.com,sk-ecdsa-sha2-nistp256@openssh.com,rsa-sha2-512,rsa-sha2-256
debug2: ciphers ctos: chacha20-poly1305@openssh.com,aes128-ctr,aes192-ctr,aes256-ctr,aes128-gcm@openssh.com,aes256-gcm@openssh.com
debug2: ciphers stoc: chacha20-poly1305@openssh.com,aes128-ctr,aes192-ctr,aes256-ctr,aes128-gcm@openssh.com,aes256-gcm@openssh.com
debug2: MACs ctos: umac-64-etm@openssh.com,umac-128-etm@openssh.com,hmac-sha2-256-etm@openssh.com,hmac-sha2-512-etm@openssh.com,hmac-sha1-etm@openssh.com,umac-64@openssh.com,umac-128@openssh.com,hmac-sha2-256,hmac-sha2-512,hmac-sha1
debug2: MACs stoc: umac-64-etm@openssh.com,umac-128-etm@openssh.com,hmac-sha2-256-etm@openssh.com,hmac-sha2-512-etm@openssh.com,hmac-sha1-etm@openssh.com,umac-64@openssh.com,umac-128@openssh.com,hmac-sha2-256,hmac-sha2-512,hmac-sha1
debug2: compression ctos: none,zlib@openssh.com,zlib
debug2: compression stoc: none,zlib@openssh.com,zlib
debug2: languages ctos:
debug2: languages stoc:
debug2: first_kex_follows 0
debug2: reserved 0
debug2: peer server KEXINIT proposal
debug2: KEX algorithms: curve25519-sha256,curve25519-sha256@libssh.org,ecdh-sha2-nistp256,ecdh-sha2-nistp384,ecdh-sha2-nistp521,diffie-hellman-group-exchange-sha256,diffie-hellman-group16-sha512,diffie-hellman-group18-sha512,diffie-hellman-group14-sha256,diffie-hellman-group14-sha1
debug2: host key algorithms: ssh-rsa,rsa-sha2-512,rsa-sha2-256,ecdsa-sha2-nistp256,ecdsa-sha2-nistp384,ecdsa-sha2-nistp521
debug2: ciphers ctos: chacha20-poly1305@openssh.com,aes128-cbc,aes256-cbc,aes128-ctr,aes192-ctr,aes256-ctr,aes128-gcm@openssh.com,aes256-gcm@openssh.com
debug2: ciphers stoc: chacha20-poly1305@openssh.com,aes128-cbc,aes256-cbc,aes128-ctr,aes192-ctr,aes256-ctr,aes128-gcm@openssh.com,aes256-gcm@openssh.com
debug2: MACs ctos: umac-64-etm@openssh.com,umac-128-etm@openssh.com,hmac-sha2-256-etm@openssh.com,hmac-sha2-512-etm@openssh.com,hmac-sha1-etm@openssh.com,umac-64@openssh.com,umac-128@openssh.com,hmac-sha2-256,hmac-sha2-512,hmac-sha1
debug2: MACs stoc: umac-64-etm@openssh.com,umac-128-etm@openssh.com,hmac-sha2-256-etm@openssh.com,hmac-sha2-512-etm@openssh.com,hmac-sha1-etm@openssh.com,umac-64@openssh.com,umac-128@openssh.com,hmac-sha2-256,hmac-sha2-512,hmac-sha1
debug2: compression ctos: none,zlib@openssh.com
debug2: compression stoc: none,zlib@openssh.com
debug2: languages ctos:
debug2: languages stoc:
debug2: first_kex_follows 0
debug2: reserved 0
debug1: kex: algorithm: curve25519-sha256
debug1: kex: host key algorithm: ecdsa-sha2-nistp256
debug1: kex: server->client cipher: chacha20-poly1305@openssh.com MAC: <implicit> compression: none
debug1: kex: client->server cipher: chacha20-poly1305@openssh.com MAC: <implicit> compression: none
debug3: send packet: type 30
debug1: expecting SSH2_MSG_KEX_ECDH_REPLY
debug3: receive packet: type 31
debug1: SSH2_MSG_KEX_ECDH_REPLY received
debug1: Server host key: ecdsa-sha2-nistp256 SHA256:U1bq0yIjydidN2YmdkpWhKdcsOI17wUOmu0K00n48/k
debug3: record_hostkey: found key type ECDSA in file /home/admin/.ssh/known_hosts:1
debug3: record_hostkey: found key type ECDSA in file /home/admin/.ssh/known_hosts:2
debug3: record_hostkey: found key type ECDSA in file /home/admin/.ssh/known_hosts:3
debug3: load_hostkeys_file: loaded 3 keys from 10.0.3.11
debug1: load_hostkeys: fopen /home/admin/.ssh/known_hosts2: No such file or directory
debug1: load_hostkeys: fopen /etc/ssh/ssh_known_hosts: No such file or directory
debug1: load_hostkeys: fopen /etc/ssh/ssh_known_hosts2: No such file or directory
debug1: Host '10.0.3.11' is known and matches the ECDSA host key.
debug1: Found key in /home/admin/.ssh/known_hosts:1
debug3: send packet: type 21
debug2: ssh_set_newkeys: mode 1
debug1: rekey out after 134217728 blocks
debug1: SSH2_MSG_NEWKEYS sent
debug1: expecting SSH2_MSG_NEWKEYS
debug3: receive packet: type 21
debug1: SSH2_MSG_NEWKEYS received
debug2: ssh_set_newkeys: mode 0
debug1: rekey in after 134217728 blocks
debug1: Will attempt key: /home/admin/.ssh/id_rsa
debug1: Will attempt key: /home/admin/.ssh/id_ecdsa
debug1: Will attempt key: /home/admin/.ssh/id_ecdsa_sk
debug1: Will attempt key: /home/admin/.ssh/id_ed25519
debug1: Will attempt key: /home/admin/.ssh/id_ed25519_sk
debug1: Will attempt key: /home/admin/.ssh/id_xmss
debug1: Will attempt key: /home/admin/.ssh/id_dsa
debug2: pubkey_prepare: done
debug3: send packet: type 5
debug3: receive packet: type 7
debug1: SSH2_MSG_EXT_INFO received
debug1: kex_input_ext_info: server-sig-algs=<ssh-ed25519,ssh-rsa,rsa-sha2-256,rsa-sha2-512,ssh-dss,ecdsa-sha2-nistp256,ecdsa-sha2-nistp384,ecdsa-sha2-nistp521>
debug3: receive packet: type 6
debug2: service_accept: ssh-userauth
debug1: SSH2_MSG_SERVICE_ACCEPT received
debug3: send packet: type 50
debug3: receive packet: type 51
debug1: Authentications that can continue: publickey,password,keyboard-interactive
debug3: start over, passed a different list publickey,password,keyboard-interactive
debug3: preferred publickey,keyboard-interactive,password
debug3: authmethod_lookup publickey
debug3: remaining preferred: keyboard-interactive,password
debug3: authmethod_is_enabled publickey
debug1: Next authentication method: publickey
debug1: Trying private key: /home/admin/.ssh/id_rsa
debug3: no such identity: /home/admin/.ssh/id_rsa: No such file or directory
debug1: Trying private key: /home/admin/.ssh/id_ecdsa
debug3: no such identity: /home/admin/.ssh/id_ecdsa: No such file or directory
debug1: Trying private key: /home/admin/.ssh/id_ecdsa_sk
debug3: no such identity: /home/admin/.ssh/id_ecdsa_sk: No such file or directory
debug1: Trying private key: /home/admin/.ssh/id_ed25519
debug3: no such identity: /home/admin/.ssh/id_ed25519: No such file or directory
debug1: Trying private key: /home/admin/.ssh/id_ed25519_sk
debug3: no such identity: /home/admin/.ssh/id_ed25519_sk: No such file or directory
debug1: Trying private key: /home/admin/.ssh/id_xmss
debug3: no such identity: /home/admin/.ssh/id_xmss: No such file or directory
debug1: Trying private key: /home/admin/.ssh/id_dsa
debug3: no such identity: /home/admin/.ssh/id_dsa: No such file or directory
debug2: we did not send a packet, disable method
debug3: authmethod_lookup keyboard-interactive
debug3: remaining preferred: password
debug3: authmethod_is_enabled keyboard-interactive
debug1: Next authentication method: keyboard-interactive
debug2: userauth_kbdint
debug3: send packet: type 50
debug2: we sent a keyboard-interactive packet, wait for reply
debug3: receive packet: type 60
debug2: input_userauth_info_req: entering
debug2: input_userauth_info_req: num_prompts 1
(admin@10.0.3.11) Password:

Sheikh

Staff

hello @Waloo5

Please share the SysOID of the switch. This you can get from the switch itself or from Alcatel documentation.

If the switch is detected automatically by FortiNAC then you can right-click the switch in inventory and click "Set device Mapping" to see SysOID.

regards

Sheikh

If you have found a solution, please like and mark it as solved to make it easily accessible for everyone.

Waloo5Author

Explorer III

hi @Sheikh

OID:	1.3.6.1.4.1.6486.801.1.1.2.1.11.1.4
Description:	Alcatel-Lucent Enterprise OS6860-P48 8.6.289.R01 GA, July 13
Standard Bridge MIB:	Yes
Standard VLAN MIB:	No
Standard IP MIB:	Yes
Current Mapping:	System Defined: OmniSwitch 6860

Thank you for your reply

Sign up

Login with SSO

Login to the community

Login with SSO

Scanning file for viruses.

This file cannot be downloaded