Accessing IP Camera from another network

Still I didn' t get answer, So please help me soon...........

hi, and welcome to the forums. Basically, you have just to create one policy to allow traffic from port1 to port2. Routing is done automatically because the FGT knows about both networks. Go to Policy > Policy > Policy Create New source interface: port1 source addr: LAN_172_1 dest. interface: port2 dest. addr: LAN_172_2 schedule: always service: ALL action: ACCEPT NAT: do not check log: check Done. Place this policy above other policies which are less specific, ie. policy port1->wan1. Test. This will not apply any UTM features, like AV or IPS. You may want to add this later. This is fairly basic which tells me you' re new to Fortigates and/or firewalls in general. A good starting point for getting to know FortiOS is here http://docs.fortinet.com especially the FortiOS Handbook (the complete reference) and the Cookbook (a lot of practical recipes, step-by-step). Recommended.