Skip to main content
A
Anonymous_User
New Contributor III
June 11, 2007
Question

Access to SSL VPN clients from internal network

  • June 11, 2007
  • 1 reply
  • 7095 views
Hi, in my company, we are using SSL VPN to access to internal network. And all is working fine, but I need to access to these remote clients from the internal network using the virtual ip assigned in the ssl tunnel. Is this possible? Now, I' m doing a ping at this ip and is not responding. We have Fortigate 200. Thanks in advance.

    1 reply

    rwpatterson
    rwpatterson
    New Member
    June 12, 2007
    It is possible, but you have to do a bit of work first. Assign the SSL VPN clients NAT IP addresses in the group policies, then create a policy that allows internal > SSL VPN subnet/range. This works here for us without a problem. Get the ports right, and you' re done.
    A
    Anonymous_UserAuthor
    New Contributor III
    June 14, 2007
    Hi, I don' t understand what do you refer when you say " Assign the SSL VPN clients NAT IP address in the group policies" . Do you refer, that I have to asign to the SSL VPN clients IP from the internal range?. Thanks for all.
    Terms & ConditionsAccessibility statement