80C as Wifi Controller Only - No Network Access

Forum|Forum|10 years ago
July 2, 2016
0 replies
2157 views

Hi

We have swapped out an 80C with another UTM but kept the 80C solely as a controller for 2 WAPs. Wireless devices are getting the proper IP settings but don't have any access to the network. Configuration as follows:

[ul]

UTM has 3 internal IPs: 10.1.1.1, 10.1.2.1 & 192.168.1.1

FG IP: 10.1.1.2

STAFF WLAN: 10.1.2.2 with DHCP 10.1.2.10-254, DNS 10.1.2.1, GW 10.1.2.1

GUEST WLAN: 192.168.1.2 with DHCP 192.168.1.10-254, DNS 8.8.8.8, GW 192.168.1.1[/ul]

Although there are 3 different subnets, they are all on the same LAN. VLANs cannot be used due to switches which client does not want replaced.

I can give any other machine the same IPs as either of the WLANs and it will have proper internet access, but any devices connected via the WLANs has no network access at all.

Any suggestions as to how this scenario should be configured?

Sign up

Login with SSO

Login to the community

Login with SSO