Skip to main content
kaixin
kaixin
New Member
December 15, 2020
Solved

6.4.3 NPU Vdom link didn't work

  • December 15, 2020
  • 1 reply
  • 2807 views

Hi everyone,

I'm using Fortigate 301E with os 6.4.3, I have a very strange problem, the default NPU_vdom_link didn't work at all. The traffic was ended by the NPU vdom interface, and it didn't forward to another one. I try to create two vlans attached to both NPU-vdom-link, but without luck.

 

So I try to use traditional vdom link instead, by creating a new vdom link interface, everything works fine!!! 

But the traditional vdom link can't use as a SD-WAN member.

 

Is this the bug in FortiOS 6.4.3?

    Best answer by emnoc

     Run the "diagnose sys sdwan member" command and see what the fortios shows. I'm sure you can install vdom links in a SDWAN as members. open a ticket to confirm with support.

     

     

    Ken Felix

     

    1 reply

    emnoc
    emnocAnswer
    New Member
    December 15, 2020

     Run the "diagnose sys sdwan member" command and see what the fortios shows. I'm sure you can install vdom links in a SDWAN as members. open a ticket to confirm with support.

     

     

    Ken Felix

     

    kaixin
    kaixinAuthor
    New Member
    December 16, 2020

    emnoc wrote:

     Run the "diagnose sys sdwan member" command and see what the fortios shows. I'm sure you can install vdom links in a SDWAN as members. open a ticket to confirm with support.

     

     

    Ken Felix

     

    Thanks for reply~ 

    I create a new normal vdom-link, and added it to SD-WAN member successfully, and set the Gateway IP from another vdom's and it works fine~

     

    But the NPU-vdom-link still not working, I don't know whether it's a FortiOS issue.

    The service contact is out of date and I can't contact support. If you know any settings about NPU-vdom-link please let me know~ 

    Thank you.

    Terms & ConditionsAccessibility statement