Skip to main content
ashmite
New Member
August 19, 2019
Question

6.2 and 3rd Party GBIC

  • August 19, 2019
  • 2 replies
  • 8713 views

Has anyone tried 3rd party GBICs with 6.2.x?  We lost functionality when we upgraded to 6.2.x OS on the switch.  We reverted and they worked again.

 

Thx

 

--Joel

 

    2 replies

    New Member
    September 17, 2019

    Which firmware version did you downgrade to? My GBICS are also not working in 6.2.1.

    ashmite
    ashmiteAuthor
    New Member
    September 17, 2019

    We used a switch with 5.6.x for testing.  Then tried upgrading to 6.0.x and then downgraded again to verify they started working. Support has simply been talking around the problem with the standard "unsupported" line.  I've been working through my sales team to try to get an answer.  I purchased a ton of new GBICs and they are all useless if we upgrade.

    New Member
    September 18, 2019

    Joel:

     

    I found a solution to my problem which was connecting a standalone FW-124E to a Cisco 3750X via fiber. It appears in 6.2 there is an issue with the trunking. I removed the trunk setup on the FortiSwitch port in which I installed the GBIC, and just added all VLANs to the Allowed VLANs. Funny thing, the trunking worked when connecting the two switches by RJ45 ports.

    sel18
    Explorer
    April 8, 2022

    Hello @Joe667 

     

    please i have the same issue with the same situation, i have Fortiswitch 124E connected via fiber to cisco 3750 after adding the command speed nonegotiate the link be UP/UP but still no traffic between the two switch. how can i solve this issue please ?

     

    thanks in advance