Skip to main content
sherrysafdar
sherrysafdar
New Member
January 11, 2020
Solved

400, 500, 600, 601E 802.3ad LAG.

  • January 11, 2020
  • 1 reply
  • 3982 views

Does anyone know if the following FortiGate model supports 802.3ad LAG and LACP? My switches do support LACP and would like to avoid non-LACP aggregation.

 

400, 500, 600, 601E 

 

Thank you,

    Best answer by ede_pfau

    This is documented in the Feature Matrix on docs.fortinet.com:

    https://fortinetweb.s3.amazonaws.com/docs.fortinet.com/v2/attachments/072a9f53-1a16-11e9-9685-f8bc1258b856/SWMTX-602-201809-R29.pdf

     

    Features depend on the OS version. The link above is for FOS v6.0.2.

     

    Sometimes not all features are supported from the first major version on, like for example LACP on the desktop models with internal SSD (61E, 81E,...). When they are added you will find a notice in the Release Notes. And some time later the Feature Matrix is updated.

    1 reply

    Toshi_Esumi
    SuperUser
    Toshi_Esumi
    SuperUser
    January 11, 2020

    They should. Even 400A supported it (https://kb.fortinet.com/kb/documentLink.do?externalID=FD30542). You should be able to test it easily before putting actual traffic on.

    ede_pfau
    SuperUser
    ede_pfauAnswer
    SuperUser
    January 12, 2020

    This is documented in the Feature Matrix on docs.fortinet.com:

    https://fortinetweb.s3.amazonaws.com/docs.fortinet.com/v2/attachments/072a9f53-1a16-11e9-9685-f8bc1258b856/SWMTX-602-201809-R29.pdf

     

    Features depend on the OS version. The link above is for FOS v6.0.2.

     

    Sometimes not all features are supported from the first major version on, like for example LACP on the desktop models with internal SSD (61E, 81E,...). When they are added you will find a notice in the Release Notes. And some time later the Feature Matrix is updated.

    AdiMizil
    AdiMizil
    New Member
    January 12, 2020

    ede_pfau wrote:

    This is documented in the Feature Matrix on docs.fortinet.com:

     

    I was waiting for this feature for 80E for a long time, but since FortiOS 6.2 this is available. - 

     

    NAME IS :   Link Aggregation/Redundant Ports for HA

     

    ® FortiOS V6.2.2 Feature/Platform Matrix

     

    https://fortinetweb.s3.amazonaws.com/docs.fortinet.com/v2/attachments/df54afe2-eabc-11e9-8977-00505692583a/SWMTX-622-201910-R30.pdf

     

    I have a pair of 80E in HA and FortiSwitches in managed fortilink and I can create an aggretate link (LACP 802.3ad). 

     

    Kind regards, 

    Adi

     

     

     

     

    Terms & ConditionsAccessibility statement