3rd party DDNS configuration on 7.2.1

Question

Hi,

I used to configure 3rd party DDNS on 6.4.x using the following:

Execute the following commands in a CLI session:

config system ddns
edit 1
    set monitor-interface "wan1"
    set ddns-server ddnsservice.example
    set ddns-domain "hostname"
    set ddns-username "username"
    set ddns-password password

But with 7.2.1 i could not find the option to add the username and password just the server, and domain !!

Any tips
To configure DDNS servers other than FortiGuard in the CLI:
config system ddns     edit <DDNS_ID>         set monitor-interface <external_interface>         set ddns-server <ddns_server_selection>         set server-type {ipv4 | ipv6}         set ddns-server-addr <address>         set addr-type ipv6 {ipv4 | ipv6}     next end
https://docs.fortinet.com/document/fortigate/7.2.0/administration-guide/685361/ddns

set addr-type ipv6 {ipv4 | ipv6} next endhttps://docs.fortinet.com/document/fortigate/7.2.0/administration-guide/685361/ddns

Anonymous_User · Accepted Answer

Hello,

I checked in 7.2.1 in my lab the commands are there.
All the commands will not be mentioned in the admin guide you can check the CLI reference guide for all commands.

https://docs.fortinet.com/document/fortigate/7.2.1/cli-reference/30620/config-system-ddns

https://docs.fortinet.com/document/fortigate/7.2.0/cli-reference/30620/config-system-ddns

msolanki · Answer

Hi ABUELKHAIR

Dddns username and password option still available in 7.2.1 . it not showing in admin guide but still if you use command "set ddns-username and set ddns-password under ddns configuration you will find the option.

config system ddns
edit 1
set ddns-server dyndns.org
set ddns-domain "abc"
set ddns-username "test"
set ddns-password ENC mYrnwpLWz3+nFvu8hfiVKJR/u1YCGOzVPbXUh8AfLqkpD9fz8cqge81MKGt1yHTI/IgGT2MUq3ubvR043vXBzu4tcR9BQlXWEp7lWBW8t3NO+qgL+mRktd95o0G+2EB1OmR2D0L7Vl9ROb/hUkPmWmbVgpMjRoxxM0nDOe6u35Iyi39Xr2u3hPeb91Ck1P7wURhJ0A==
set monitor-interface "port1"

You can refer below CLI reference

https://docs.fortinet.com/document/fortigate/7.2.0/cli-reference/30620/config-system-ddns

Thanks

Madhav