Technical Tip: Configuring an 'Account Code' to make some restricted calls

1. Go to Security -> User Privilege -> Account Code, configure a new profile, and define the 'Code'. 

Note:

The 'Code' can be used to restrict International, Long Distance, Local, or Internal calls.     

In this example, the 'Code' will be used to restrict International-calls. Enable 'Shared' to use this code on any extension.

2. Go to Security -> User Privilege. From the section 'Call Restriction' set "Allo International call: Allowed with Account:

Select the profile previously created over the 'Account Code' field.

3. Go to Extension -> Extension  -> IP Extension, and select the extension-id. 
   
4. From the User Setting -> Management, select the User Privilege profile where call-restriction was enabled.

Note:

The FortiVoice system uses the Location settings (PhoneSystem -> Settings) to identify the prefix for:

• LongDistance (Long-distance prefix).
• International (International prefix).
• Internal (Area code).
  
  

config pbx location
  set country Dominican Republic
  set area-code 809 829 849
  set main-number 8092218000
  set domestic-prefix 011
  set international-prefix 1
  set emergency-number 911
  set default-timezone 16
end