Technical Tip: Configuring SNMPv2c Monitoring on FortiSOAR Node
| Description | This article describes how to configure SNMPv2c on a FortiSOAR node for monitoring purposes. It includes the installation of necessary packages, configuration of SNMP, and verification of SNMP service functionality. |
| Scope | FortiSOAR v7.6.x |
| Solution | Step 1: Install the SNMP Packages on the FortiSOAR Node using the YUM installer.
# yum install -y net-snmp net-snmp-libs net-snmp-utils
Step 2: Update the SNMP configuration file in a single line.
echo 'com2sec allconfig default myfsrcommunity' > /etc/snmp/snmpd.conf
Step 3: Restart the SNMP service and enable it to start on boot.
# systemctl restart snmpd # systemctl enable snmpd
Step 4: Verify the installed SNMP Services and retrieve system performance data.
# snmpwalk -v 2c -c myfsrcommunity -o e localhost ucd-snmp-mib::memory # snmpwalk -v 2c -c myfsrcommunity -o e localhost ucd-snmp-mib::systemstats |