Technical Tip: Server IPs are missing from the admin trusted hosts after configured SNMP

The SNMP configuration shows 'Server IPs are missing from the admin trusted hosts' and SNMP server IP already specified in trusted hosts as shown:

1. Make sure the trusted hosts and SNMP server IP address are the same.
2. Remove IPv6 Hosts '::/0' in the SNMP community. 

Example of SNMP community configurations:

config system snmp community
    edit 3
        set name "test2"
            config hosts
                edit 1
                    set ip 10.176.2.93 255.255.255.255
                next
            end

                config hosts6
                    edit 1
                next
            end
        next
    end

Use the CLI Console to remove the hosts6 for /::/0':

config system snmp community
(community) # edit 3
(3) # config hosts6
(hosts6) # delete 1
(hosts6) # end

(3) # show

config system snmp community
    edit 3
        set name "test2"
            config hosts
                edit 1
                    set ip 10.176.2.93 255.255.255.255
                next
            end
        next
    end

Note:

The hosts6 for '::/0' has been removed or removed via WebUI.