Technical Tip: How to evaluate Rogue units in FortiNAC
Description
This article describes how to evaluate Rogue units in FortiNAC after creating a new rule.
Solution
For this test, it is SW1.domain.local and the Container Building2.
This article describes how to evaluate Rogue units in FortiNAC after creating a new rule.
Solution
For this test, it is SW1.domain.local and the Container Building2.
From Gui, go to Network Devices -> Topology and select under container the interested unit.
There are three units recognized as Rogue.
Create a new 'Device Profiling RULE'.
This test is using the Vendor OUI method and uses Rule number 1 to evaluate Rogue units.
Select 'Run'.
Evaluating 3 rogues.
Check 'Profiled Devices 'under 'Hosts' menu.
