Technical Tip: Cisco 1852i wireless controller not supported
Description
At this time, Cisco 1852i wireless controller is not supported.
This device does not have the necessary capabilities to allow for full integration with Network Sentry. This is due to limited CLI and SNMP capability. The following functions have been tested and do not work as of this writing:
There may be others as well that do not function as needed.
Scope
Version: All
Solution
At this time, Cisco 1852i wireless controller is not supported.
This device does not have the necessary capabilities to allow for full integration with Network Sentry. This is due to limited CLI and SNMP capability. The following functions have been tested and do not work as of this writing:
- aaa-override
- Session list showing connected clients
There may be others as well that do not function as needed.
Scope
Version: All
Solution
This behavior is considered a Known Anomaly. A complete list of Known Anomalies is available in the Fortinet Document Library.
Should the above capabilities become available, open a new case with Support for re-evaluation. Provide the information outlined in the related KB article below.
Related Articles
Technical Note: Information to provide when requesting device support
