Technical Note: Unable to connect to Hyper-V appliance
Description
This article discusses the behaviour where connectivity is lost to either eth0 or eth1 on a Hyper-V appliance.
Configure the interface for non-legacy mode. Refer to the Hyper-V Virtual Machine Installation Guide for instructions.
Scope
Appliances installed on Hyper V platforms.
Solution
Workaround: Restart the network interfaces to clear the condition.
Workaround: Restart the network interfaces to clear the condition.
1) Reload the vlaninterfaces file. Type
service bsc-network restart
service bsc-network restart
2) Restart network service. Type
service network restart