Technical Note: Changing the Remediation setting on an existing scan
Description
The amount of time before marking a host "At-Risk" after failing a scan is determined by the Remediation setting at the time of scan failure. Therefore, hosts that have already failed the scan will not be affected if the scan's Remediation setting is changed.
To view hosts currently marked "Pending At-Risk", navigate to Hosts > Hosts View and set a custom filter for Security: Pending at Risk under the Hosts tab.
For more information, see section "Delayed Remediation for Scanned Hosts" in the Administration and Operation manual in the Fortinet Document Library or in the Online Help.
Scope
Version: 8.x
Solution