Technical Tip: How to check FortiGate HA non-sync configurations from FortiManager

Description

This article describes how to check FortiGate HA synchronization status from FortiManager using related commands.

Scope

FortiManager

Solution

If the FortiGate HA status is not in SYNC, run the following command in FortiManager to check which configuration is not in SYNC between the primary and secondary FortiGate.

exe fmpolicy print-device-nonsync-config <adom-oid> <dev-oid> <primary-sn> 

Use '?' in the command to show the OID and serial number:

exe fmpolicy print-device-nonsync-config ?

Below shows the sample output: