Skip to main content
mle2802
Staff
Staff
Jul 9, 2025 1:34 PM UTC

Troubleshooting Tip: Netflow is not exporting local-in traffic

Description This article describes how to troubleshoot the issue with Netflow is not sending local-in traffic for analysis.
Scope FortiGate
Solution

Configure the  Netflow on FortiGate using this KB article: Technical Tip: How to Configure Netflow Description.

Run the packet capture on port UDP/2055 from FortiGate, and it is possible to see that there is no traffic matching the filter 'cflow.protocol == 1' for ICMP traffic to FortiGate.

Screenshot 2025-07-04 144427.png
To export traffic to the collector, traffic logs need to be enabled. On FortiGate, there are no logs for local traffic. 

Screenshot 2025-07-04 145518.png
To enable local-in log, run the following command:

config log setting
    set local-in-allow enable
    set local-in-deny-unicast enable
    set local-in-deny-broadcast enable
end

After that, confirm local-in traffic is logged and Netflow is sending it to the collector.

Screenshot 2025-07-04 145236.png

 

Screenshot 2025-07-04 145451.png

    Risk and Resilience in the Age of AI. An OT Thought Leadership Summit for Houston's Critical Infrastructure Leaders. Date: Thursday, December 3, 2026. Time: 8:30 am - 1:30 pm (CT). Location: The Westin Houston, Memorial City | 945 Gessner Road, Houston, TX 77024