Troubleshooting Tip: 'Local Reports' is not available under 'Feature Visibility'
Description
This article describes why Local reports is not available under 'Feature Visibility'.
Scope
FortiGate.
Solution
Sometimes, the 'Local Reports' option is missing under System -> Feature Visibility.
Check if the 'Enable Local Reports' option is enabled under Log & Report -> Log Settings.
To enable it through the CLI, run the following CLI configuration:
config report setting
set pdf-report enable
end
set pdf-report enable
end
Note:
This command is only available for specific models. Supported and non-supported models are listed at the following link: config report setting.
‘Local Reports’ will become available under 'Feature Visibility' afterwards.
