Technical Tip: OID for power supply failure

The OID value for power supply trap. 
Name : fnTrapPowerSupplyFailure
OID : .1.3.6.1.4.1.12356.100.1.3.0.106
Solution

- This OID will send the trap when power supply failure detected. 

- Not available on all models. 

- Available on some units which support redundant power supplies. Refer datasheet for specifications.

If the OID returns 1, This means the system detects a hardware issue with the Power supply.

For example FOrtiGate-1500D, the unit have 2 power supply, the ending 0 or 1 can mean the first and second Power supply.

It is possible to get below outputs from CLI to check.

# execute sensor list

45 PS1 Status        alarm=0

50 PS2 Status        alarm=1

# execute sensor detail

45 PS1 Status        alarm=0

    type=8/111

    upper_non_recoverable=0

    upper_critical=0

    upper_non_critical=0

50 PS2 Status        alarm=1

    type=8/111

    upper_non_recoverable=0

    upper_critical=0

    upper_non_critical=0

Related Articles

Technical Tip: How to Configure FortiGate SNMP Agent for Monitoring