Technical Tip: Meaning of the counter fields in ‘diagnose test application ipsmonitor 14’
Description
This article explains the meaning of for the counter fields in ‘diagnose test application ipsmonitor 14’.
Solution
Below is the output of ‘diagnose test application ipsmonitor 14’ debug commands:
- 'rx': numbers of packets received by the IPs engine through NTurbo.
- 'tx': numbers of packets transmitted by the IPs nngine to NTurbo.
- 'drop-vdct' : numbers of packets dropped by the IPs engine due to detected attacks.
- 'drop-ctag & drop-view': numbers of packets dropped by the IPs Engine due to incorrect NTurbo info.
- 'drop-tx & drop-full': number of packets dropped by the IPs Engine due to transmit failure.
- 'drop-decode': number of packets dropped by the IPs engine due to packet decoding error.
This article explains the meaning of for the counter fields in ‘diagnose test application ipsmonitor 14’.
Solution
Below is the output of ‘diagnose test application ipsmonitor 14’ debug commands:
# diag test application ipsmonitor 14- 'Turbo Engine #373 / #374': is the IPs enginePID.
Turbo Engine #373: rx 0 tx 0 frag 0 view 0 drop(vdct 0 ctag 0 tx 0 full 0 task 0 decode 0 gtp-u 0 sock 0 frag 0 de-frag 0) free 512 (index 0 state 0 xmit_index 0 xmit_state 0)
Turbo Engine #374: rx 0 tx 0 frag 0 view 0 drop(vdct 0 ctag 0 tx 0 full 0 task 0 decode 0 gtp-u 0 sock 0 frag 0 de-frag 0) free 512 (index 0 state 0 xmit_index 0 xmit_state 0)
……………
- 'rx': numbers of packets received by the IPs engine through NTurbo.
- 'tx': numbers of packets transmitted by the IPs nngine to NTurbo.
- 'drop-vdct' : numbers of packets dropped by the IPs engine due to detected attacks.
- 'drop-ctag & drop-view': numbers of packets dropped by the IPs Engine due to incorrect NTurbo info.
- 'drop-tx & drop-full': number of packets dropped by the IPs Engine due to transmit failure.
- 'drop-decode': number of packets dropped by the IPs engine due to packet decoding error.
