Technical Tip: How to enable forticlient-on-net-status on Interface

Go under Network-> Interface, choose the desired interface to edit,  Toggle the' DHCP Server ' option if not enabled, and make sure ' Security Fabric protocol ' is enabled on the interface as shown below:

Edit the interface gain Toggle the forticlient-on-net-status to enable the feature, and select OK save changes.

Example screenshot:

From CLI example:

config system dhcp server
    edit <id>
        set forticlient-on-net-status en
    end

Note: 

The forticlient-on-net-status will not be enabled, If the security fabric option is not enabled on the Interface along with the DHCP server configuration.