Technical Tip: How to create ISDB for Adobe

To apply an Adobe ISDB object to a policy from the GUI and CLI:

1. Navigate to the policy and objects: Create a new policy for the ISDB. Give incoming and outgoing interfaces based on topology, select 'Destination', select 'Address', and change to Internet service.

Add all the Adobe objects under the ISDB, set action as Accept, enable NAT, and enable policy. 
Make sure to place the ISDB policy on the top of the existing policies to match and allow.

2. To enable the Internet service objects on the Policy:

config firewall policy
    edit 44
        set uuid 3e487734-6b75-51f0-7a67-89cba431559a
        set srcintf "any"
        set dstintf "any"
        set action accept
        set srcaddr "all"
        set internet-service enable
        set internet-service-name "Adobe-Adobe.Experience.Cloud" "Adobe-Adobe.Sign" "Adobe-DNS" "Adobe-FTP" "A
        dobe-ICMP" "Adobe-Inbound_Email" "Adobe-LDAP" "Adobe-NetBIOS.Name.Service" "Adobe-NetBIOS.Session.Service"        "Ad
      obe-NTP" "Adobe-Other" "Adobe-Outbound_Email" "Adobe-RTMP" "Adobe-SSH" "Adobe-Web"
        set schedule "always"
        set logtraffic all
        set nat enable

    next
end