Technical Tip: Email alert settings not available
Description
This article describes explains that email alert settings are not available from GUI after upgrading.
It will explain how to use it from CLI.
Solution
After upgrading the firewall to 6.4.x , the email alert feature will be removed from the GUI (Log & Report -> Email Alert Settings), and replaced with the Email automation stitches.
Continue using the email alert feature with the CLI console is possible.
CLI configuration for email alert.
This article describes explains that email alert settings are not available from GUI after upgrading.
It will explain how to use it from CLI.
Solution
After upgrading the firewall to 6.4.x , the email alert feature will be removed from the GUI (Log & Report -> Email Alert Settings), and replaced with the Email automation stitches.
Continue using the email alert feature with the CLI console is possible.
CLI configuration for email alert.
# config alertemail setting
set username ''
set mailto1 ''
set mailto2 ''
set mailto3 ''
set filter-mode category
set email-interval 5
set IPS-logs disable
set firewall-authentication-failure-logs disable
set HA-logs disable
set IPsec-errors-logs disable
set FDS-update-logs disable
set PPP-errors-logs disable
set sslvpn-authentication-errors-logs disable
set antivirus-logs disable
set webfilter-logs disable
set configuration-changes-logs disable
set violation-traffic-logs disable
set admin-login-logs disable
set FDS-license-expiring-warning disable
set log-disk-usage-warning disable
set FSSO-disconnect-logs disable
set ssh-logs disable
set FDS-license-expiring-days 15
set local-disk-usage 75
end