Technical Tip: Importing a ZTNA Certificate to Android Endpoints Using ManageEngine MDM

Importing the ZTNA Certificate into ManageEngine MDM.

1. Log in to the ManageEngine MDM Console.
2. Navigate to Device Mgmt -> Certificates.
3. Select Add Certificates and upload the ZTNA certificate file.

Once uploaded, the certificate becomes available for assignment through a device profile.

Deploying the certificate to Android devices.

1. Navigate to Device Mgmt -> Profiles.
2. If no profile exists, create a new profile. Otherwise, edit an existing profile assigned to the target Android devices.
3. In the profile configuration view, go to the certificate section.
4. Add the imported ZTNA certificate (from the previous step) to the profile.
5. Save and deploy the profile to the intended Android endpoints.

Verifying Certificate Installation on the Android device.

After deployment, confirm the certificate installation on the Android endpoint:

1. Open Settings.
2. Navigate to Security and Privacy.
3. Select More Security Settings.
4. Tap View Security Certificates.
5. Switch to the User tab.
6. Verify that the ZTNA Certificate appears in the list.

If the certificate is visible under the User tab, the deployment has been completed successfully.