Technical Tip: How to add detail with log columns on FortiPAM

Description

This article describes how to add detail with log columns on FortiPAM. 

Scope

FortiPAM.

Solution

By default, not all possible options on the columns are visible in the logs section. 

If needed, other columns can be selected to expand the view, as shown below ('right-click' on the column and select the options and apply the change). There is also a possibility to deselect columns to clean up the view. 

After that, the selected columns will be visible in the columns section, and values from these can be used to filter the logs, using the context menu on each value.