Skip to main content
laltuzar
Staff
laltuzar
Staff
May 7, 2026

Technical Tip: Explaining the line 'Firmware qcn9224 Version: WLAN.WBE.1.1.r7-00022-QCAHKSWPL_SILICONZ-1 v251003 RX hang' on FortiAP

  • May 7, 2026
  • 0 replies
  • 28 views

Description

This article explains the meaning for the 'Firmware qcn9224 Version: WLAN.WBE.1.1.r7-00022-QCAHKSWPL_SILICONZ-1 v251003 RX hang' line on 'fap-tech' and 'fap-get-status' output.

Scope

FortiAP.

Solution

Some network administrators may be confused by the line 'Firmware qcn9224 Version: WLAN.WBE.1.1.r7-00022-QCAHKSWPL_SILICONZ-1 v251003 RX hang' in the fap-get-status command output.

This is a common scenario where the AI does not understand the full context of the output and incorrectly concludes this line indicates a possible failure on software or hardware from the FortiAP.

It has been confirmed that this line does not represent a problem nor system hang. This string is an internal version identifier. It does not mean a hang is occurring on the user side.

Example output:

================================================================================
OUTPUT of command fap-get-status:
================================================================================
Version: FortiAP-231K v7.6.3,build1032,251022 (GA)
Firmware IPQ5332 Version: WLAN.WBE.1.1.r7-00022-QCAHKSWPL_SILICONZ-1 v250718 WFA MLO
Firmware qcn9224 Version: WLAN.WBE.1.1.r7-00022-QCAHKSWPL_SILICONZ-1 v251003 RX hang
SPF Version: QCA_Networking_2022.SPF.12.2 CSU2
Power Mode: full (POE1=AT POE2=Not Supported)
Secure Boot: On
Security Level: High
Firmware Signature: certified
Serial-Number: FP231KXXXXXXXXXX
BIOS version: 04000009
BIOS data version: 4
System Part-Number: P31074-03
Hardware Revision Info: PVT
Regcode: N
Base MAC: b4:b2:e9:xx:xx:xx
Hostname: XXXXXXXXXXXX
Branch point: 1032
Release Version Information: GA
FIPS-CC mode: disabled

    Terms & ConditionsAccessibility statement