Technical Tip: How to Create a NAT64 Firewall Poli...

RobBlenk · 01-16-2024

Description This article describes how to create a NAT 64 firewall policy to allow traffic to a virtual IP on the network. Scope FortiOS Solution Step 1:Enable IPv6 in the GUI. This article describes how to do that in detail. Step 2:Create a NAT64 VI...

RobBlenk · 10-25-2023

Description This article describes what could be the cause if the FortiClient VPN fails to connect at 40% with PKI certificate authentication. Scope FortiClient SSL VPN with PKI certificate authentication. Solution The logs will show the Action as 's...

RobBlenk · 08-17-2023

Description This article describes that when there are many users that need to configure SSL VPN, it can be helpful to send the configurations by email or SMS rather than configuring each FortiClient individually. In this way, users just need to sele...

RobBlenk · 05-02-2023

Description This article shows a possible cause of failed authentication to a TACACS+ server when the connection to the server is up and user credentials are good. Scope FortiGate v6.x.x and v7.x.x. Solution Connect to the TACACS+ server in the GUI s...

User Statistics

User Activity

Technical Tip: How to Create a NAT64 Firewall Policy for a VIP

Troubleshooting Tip: FortiClient VPN stops at 40% with PKI users

Technical Tip: How to configure FortiClient app via email

Technical Tip: TACACS+/Radius authentication fails when the connection is good

Technical Tip: How to Create a NAT64 Firewall Poli...

Technical Tip: TACACS+/Radius authentication fails...

KCS