Description This article describes the process of determining the CPU
operation temperature in the FortiGate. This method may apply to
FortiGate running x86-based CPU like Intel or AMD CPU. It can be
impossible to retrieve the exact temperature thres...
Description This article describes a clarification on the manual
licensing upload process for FortiProxy VM when the appliance is
completely isolated from the Internet. Scope FortiProxy VM. Solution
Based on the documentation about this topic, which ...
Description This article describes how to verify the secondary WAN
connectivity. This may apply after deploying a new ISP to the FortiGate
to use as the backup for the existing WAN interface, or when replacing
the secondary WAN circuit. As example, t...
Description This article describes how to set up a custom iPerf server
to test connection speed. Scope FortiGate, Windows, Linux. Solution Even
though there are public iPerf servers that can be used to test internet
speed, these servers are often ove...
Description This article describes the configurations needed to set up a
redundant iBGP connection via various types of connection. This setup
will focus on the iBGP over ADVPN and physical connection at the same
time. Scope FortiGate. Solution Befor...
For virtual server, I don't think it will be possible. You can think of
the virtual server as a VIP that can do mapping from one external IP to
multiple real IP with the same port forwarding. It is one object,
therefore, you can only apply one firewa...
Hello, If you want to apply different UTM profile for each internal
hosts that will be translated from the same public IP, I would suggest
doing static VIP with port forwarding: for example:- For the VIP mapping
the public IP to 192.168.1.1:443 --> w...