Hi @Hassan-wahab , Did you configure VNet peering? It allows
bidirectional traffic between two VNets. If not, the traffic flow won't
be allowed by the VNet itself. That's why you can't see anything on your
firewall when trying to generate traffic bet...
Hi @sagvan , The most logical approach seems to be creating a guest SSID
that only provides internet access and is not used for any other
service. Since you mentioned you haven't defined this yet, I recommend
considering it on the additional consider...
Hi @Muri , FortiMail supports the use of wildcards to block patterns of
addresses. You can use the asterisk (*) and question mark (?) as
wildcards.
https://docs.fortinet.com/document/fortimail/7.4.2/administration-guide/598555/configuring-the-block-l...
Hi @sagvan , Here are some recommendations and answers to your questions
for creating a new SSID with limited access on your infrastructure: 1.
WPA2 vs. WPA3WPA2:Easier to manage with a shared password.Less secure
than WPA3 but still widely used.Limi...
Hi @plip , It sounds like your FAZ1000F is encountering a boot issue,
potentially due to a corrupted firmware image or hardware problem.
Before do anything ensure you are using the correct firmware version for
your specific model. Here are the steps ...
